Dillon dynamometers and tension meters are used within the communications sector for a variety of tasks, including telephone line sagging and ensuring cell/radio towers are vertical. Dillon products help to reduce time on site by producing quick and accurate results for tension readings, while recording all the readings and date/time which can be easily exported once the job has been completed.

For communication towers it is important the masts are plumb to ensure maximum network coverage. By using the Quick-Check tension meter this can be achieved within minutes. Inbuilt software can measure, read and record each guy wire and anchor point to ensure that the tower is completely straight.

The same can be said about erecting an overhead telephone line, it is very important that the conductors are under a safe tension. If the conductor wires are too stretched between supports in a bid to save conductor material, the stress in the conductor may reach unsafe value and in certain cases the conductor may break due to excessive tension.

Find out more or request a quote
  • Recommended Equipment
AP Dynamometer

AP Dynamometer

The AP Dynamometer has limitless versatility as a tension and weight measuring instrument.

Find out more
EDjunior Dynamometer

EDjunior Dynamometer

The EDjunior dynamometer gets straight to the point, apply a load - take a reading.

Find out more
EDXtreme Dynamometer

EDXtreme Dynamometer

The EDXtreme exemplifies the trademark precision and rugged construction of Dillon dynamometers.

Find out more
Quick-Check tension meter

Quick-Check tension meter

Quickly measures tension in cable guardrails, guy lines and overhead wires.

Find out more

Copyright 2017

Dillon is an Avery Weigh-Tronix, LLC brand. All Rights Reserved Worldwide